How do I clean my manifold?

Cleaning the Micron Sensor Over time, the vacuum sensor of the SMAN may become contaminated with dirt, oil, and other contaminants from pulling vacuums.

1. Never use an object such as a cotton swab to clean the sensor, you may cause damage to the sensor.
2. Open all valves and cap all the ports except for the VAC port.
3. Drop enough Isopropyl (rubbing) alcohol into the VAC port using an eye dropper or funnel so that it can flush out contaminants.
4. Cap VAC port and gently shake your SMAN460 upside down to clean sensor.
5. Turn right side up. Open a port to pour out the rubbing alcohol and open all ports to allow sensors to dry out. Drying usually takes about an hour.